ESET 产品的变更日志
此页面显示最新 ESET 产品版本的更改日志和发行说明，从最新到最早列出（仅提供英文版）。单击产品名称以查看其更改日志。每个产品都包含最近 20 个更改日志。发行周期可能因地区或国家而异。
ESET Full Disk Encryption for Windows 最近的变更日志
Version 2.1.12.0
- New: Used space encryption mode. Speeds up encryption and decryption by encrypting only the disk space that contains data
- New: Hardware support for AES-NI which improves encryption performance and decreases CPU load
- New: Now supports Microsoft Direct Storage for non-encrypted disks
- Improved: Further improvements to Full Disk Encryption performance during encryption and regular use such as initial encryption and R/W speeds
- Improved: Reduced the time taken to display the pre-boot authentication screen by 10 seconds on certain Lenovo laptops, such as the T14 Gen3 and T16 Gen2 models
- Fixed: A problem where when ESET Secure Authentication was used on an Encrypted device using an SSO login, ESA would not prompt the user for their 2FA code
- Fixed: A problem on Windows 24H2 where a system would not shutdown
- Fixed: A problem on Windows 24H2 where a user would be signed out when attempting to hibernate the system
- Fixed: A problem where the pre-boot SSO password would not be synchronized when the user changed their password from Windows
- Fixed: If the password age policy was set, users with SSO were incorrectly prompted to change their password when it expired. Windows password rules apply when using SSO
- Fixed: A problem where SSO would not work when resuming from hibernate
- Fixed: A problem on some Dell devices where the pre-boot screen would pause before input was accepted
Version 2.0.18.0
- Added: Single sign-on. Users can login to their encrypted system and Windows profile using their Windows password
- Added: Disabling or pausing pre-boot authentication now leverages the Trusted Platform Module (TPM). Systems that were encrypted using the TPM and have authentication paused or disabled will be upgraded automatically
- Added: Turkish Q & F keyboard layouts to the pre-boot environment
- Improved: User interface now has rounded corners in Windows 11
- Improved: Pop-up dialogs have been improved
- Fixed: A problem where when attempting to encrypt using OPAL and TPM, if the OPAL check fails then the system will fallback to not using OPAL or TPM in the encryption process
- Fixed: A problem on Microsoft Surface devices where the system would not be able to boot after turning on Secured Core
- Fixed: A problem causing system information to be malformed which prevented the AIS service from starting
- Fixed: A problem where modules would not be updated by the EFDE installer
- Fixed: A problem where offline licenses would become deactivated after successful initial activation
- Removed: 32 bit operating systems are no longer supported
Version 1.4.62.0
- Added: Repository load balancing support for automatic updates
- Improved: Added crash dump support for the AIS service
- Fixed: Keyboard layouts that did not adhere to caps lock rules for number keys within the bootloader. For example French and German.
- Fixed: A problem where the AIS service would crash due to insufficient local system permissions to the service control manager
- Fixed: A problem where the enter key would not move focus to the next interactable element in the bootloader
Version 1.4.58.0
- Added: Automatic application updates now use the proxy settings
- Fixed: A problem where multiple disks would be grouped as one within the UI
- Fixed: A problem where upgrading to version 1.4 caused black screen when booting on systems with older UEFI implementations
- Fixed: The bootloader now adheres to the 'User can change password' policy
- Fixed: A problem where proxy settings were not being applied
- Fixed: A problem where the product could become deactivated randomly
- Fixed: A problem with keyboard keys in the bootloader. When Caps Lock was on and combined with modifier keys (SHIFT, CTRL, etc) the wrong characters would be outputted
- Fixed: A problem when EFDE automatically updated, a status message would show stating the update had failed
- Fixed: A problem in certain environments which would cause the Agent Interface Service to crash
Version 1.4.52.0
- Added: Support for automatic upgrades via ESET PROTECT console
- Added: Support to detect missing UEFI Microsoft 3rd Party Certificate Authority
- Added: Mouse support in bootloader
- Improved: Seat data is now updated on the EFDE license when changes are detected
- Improved: Various bootloader user interface improvements
- Improved: New look user interface
- Improved: EFDE will now use the common proxy policy
- Improved: ENG US keyboard layout is only added to the operating system when required
- Improved: Automatically generate new recovery password is set to on by default
- Changed: Product versioning aligned with ESET versioning rules
- Fixed: A problem with systems freezing upon booting with encrypted SSSTC disks
- Fixed: A problem with Wortmann Terra devices freezing when the touchpad is touched within the bootloader
- Fixed: Online help links are now redirected properly
- Fixed: EFDE can no longer be installed on Windows Server 2019/2022
- Fixed: When a TPM is in a locked state the TPM recovery code is no longer shown
- Removed: OS support for Windows 7, 8 & 8.1
Version 1.3.4.39
- Fixed: Reinstalling ESET Full Disk Encryption would not apply the policy if one was set within the install package
- Fixed: Changing your password in Windows could disable the change password option in the pre-boot environment
- Fixed: A problem where BitLocker could not be disabled or enabled when Full Disk Encryption was installed
- Fixed: A problem using TPM encryption, where the system could go into automatic repair when using a disk with an SMI 2263XT controller
- Fixed: Some systems experienced blue screens (SYSTEM_THREAD_EXCEPTION_NOT_HANDLED) after performing SafeStart
- Fixed: A problem where changing the pre-boot password before the systems first reboot would cause the change password option to not display on the bootloader
- Improved: Various localization improvements
- Improved: Updated EULA
Version 1.3.3.35
- Fixed: Temporarily disabling FDE authentication now automatically changes the GUI after the set period of time
- Fixed: Service no longer crashes when MS Storage Spaces are being used on the system
- Fixed: A problem if an OPAL encrypted system crashes for any reason, the software would report it is no longer encrypted on next reboot
- Fixed: A problem where the pre-boot authentication screen would freeze when a 2nd monitor is connected or disconnected
- Fixed: Security vulnerability CVE-2022-2402 [CVSS 6.5] - reported externally
- Fixed: A problem were the pre-boot loader would not be updated during an upgrade
- Fixed: A problem with HP Elitebook failing to boot with "Unable to locate operating system boot file" error
- Fixed: MSP licenses now show no expiration in the ESET Protect console
- Fixed: Workaround for a bug in some Lenovo UEFI implementations, that incorrectly report parameters of NVMe drives. This prevented affected systems from booting, when encrypted using TPM with NVMe drives.
Version 1.3.1.25
- Added: The pause authentication command now accepts the ISO8601 date/time format
- Fixed: In rare instances computers encrypted with EFDE v1.3.0 may start decryption on their own
- Fixed: Offline licences now activate correctly when used with install and activation tasks
- Fixed: A problem where a Full Disk Encrypted system could fail to boot with "Unable to locate operating system boot file" error
- Fixed: Resuming pre-boot authentication via the resume task no longer fails when the pause time has already lapsed
- Fixed: A problem syncing recovery data when encrypting a system straight after decryption
- Fixed: An issue with MBR partition schemed disks where the recovery data would be sent to the ESET Protect with an invalid workstation ID
Version 1.3.0.22
- Added: Starting with this release. Installing EFDE on Windows 7 requires the SHA-2 code signing updates KB4474419 & KB4490628.
- Added: Automatic update of modules
- Added: Section in the user interface to show the installed modules
- Added: Ability to deploy the installer with a predefined password and keyboard map to start Full Disk Encryption (FDE)
- Added: English (Indian) keyboard layout
- Added: Status message when encryption is paused if the system is running on battery power
- Added: Ability to generate new recovery passwords from the ESET Protect console
- Added: Ability to control FDE authentication via the command line
- Added: Ability to add keyboard layouts via the command line
- Added: Status message when the system has an unsupported dynamic disk
- Added: Ability to retry encryption from the ESET Protect console if encryption has failed
- Improved: The encryption percentage symbol is on the same line in all languages
- Improved: Various localization improvements
- Fixed: Disks no longer show as RAW in the user interface when the EFDE service is not running
- Fixed: Postponing encryption no longer results in the system being reported as incompatible with EFDE
- Fixed: License information now displays correctly in the user interface prior to the initial installation reboot
- Fixed: The user interface window focus now behaves correctly
- Fixed: The recovery password index is now correct after re-encryption
- Fixed: User interface latency issues in certain network environments
- Fixed: A problem with SafeStart on Lenovo devices
- Fixed: Various issues with user interface scaling, snapping, naming, and shortcuts
- Fixed: The presentation mode state was not reset after a service restart
Version 1.2.4.12
- Improvement: EFDE no longer clears the TPM before it is used during encryption. This resolves possible compatibility issues with other software that may also use the TPM, e.g. Office 365 apps.
Version 1.2.3.11
- Fixed: Localisation issues with UKR, PLK and JPN
Version 1.2.2.8
- Fixed: Installation through the AIO installer now installs in the correct language
- Fixed: A problem where TPMs could not be initialized during encryption, on a fresh install of Windows 10 20H2 (not upgrade), Already encrypted systems were not affected.
- Fixed: A problem where TPMs could not be initialized during encryption, on Windows 10 deployed using the Microsoft Deployment Toolkit or some other deployment tools.
- Fixed: A problem where the service would intermittently crash on start-up
- Fixed: A problem where activation through a proxy server was not possible
- Fixed: A problem where when a large policy is assigned to EFDE, it will fail to start encryption
- Fixed: Automatically generated passwords will now appear in the ESMC help menu
- Fixed: Improved TPM initialization on boot
- Fixed: A problem where some software encrypted workstations occasionally fail to start or resume from sleep, with a power_state_faliure error.
Version 1.2.1.6
- Fixed: A problem where the pre-boot files would not be updated when upgrading from a previous version.
Version 1.2.0.5
- Added: Support to pause pre-boot authentication via a task and policy
- Added: Languages - Swedish, Norwegian, Danish, Finnish & Ukrainian
- Added: Improved support for firmware TPM's
- Added: Hebrew keyboard layout to the pre-boot screen
- Fixed: Issues surrounding OPAL encryption and machines sleeping
- Fixed: Touch screen devices, the eye icon in the pre-boot screen now shows the entered password
- Fixed: A problem with OPAL drives where Windows would prevent and encrypted drive from being decrypted
- Fixed: Attempting to encrypt a Legacy BIOS system would display the wrong error on Windows 10 2004. Note: EFDE does not support Legacy BIOS
- Fixed: A problem starting OPAL encryption on Toshiba THNSFJ256GCSU drives
Version 1.1.0.0
- Added: Windows 10 H1/2021 compatiiblity
- Fixed: Sending an activation task to a computer with an already activated EFDE will cause EFDE to become deactivated, if the internet is not available
- Fixed: EFDE pre-boot screen presenting in English with non-English install
- Fixed: EFDE installer run manually on non-ENU shows error
Version 1.0.47.6
- Added: Reboot pop-up prompt presented to the user after EFDE Client installation
- Added: Log regarding encryption paused due to battery usage is now implemented
- Added: Block installation of other products from ESET Encryption family
- Fixed: A bug found in UEFI implementations on some laptops, where the pre-boot screen would freeze after pressing a key on the laptop keyboard
- Fixed: Seats in EMA2 are deactivated after uninstalling EFDE_
- Fixed: OPAL Policy violation message is not shown on machines without Opal disks anymore
- Fixed: Maximum incorrect password attempts policy behave correctly after a change in console
- Fixed: Safe start happens automatically after a reboot again (if you postpone setting a FDE password and reboot a machine subsequently)
- Fixed: ES-CL installer is localised correctly
- Fixed: User now can see ESET logo when pre-boot screen is disabled
- Fixed: A scheduled Safe start is now cancelled after a policy is set to "not encrypt"